Peanut Butter Swirled Fudge Recipe (2024)

FAQs

How do you know when fudge is beaten enough? ›

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

This fudge was beaten immediately after cooking, while it was still very hot. Its crystals are so big that it has practically reverted back to a sugar state! What happened? Beating the syrup caused the formation of crystallization nuclei, anchor points to which sugar molecules attach to form crystals.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Solutions to Save Your Fudge:

You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.

Grainy Fudge

The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon.

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

What is the secret to smooth fudge that is not gritty? ›

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.

Saucepan: Choose a heavy, straight-sided metal saucepan that holds about twice the volume of your fudge recipe. A heavy pan distributes heat evenly so the ingredients are less likely to scorch when they boil at high temperature. Using a large saucepan gives the ingredients room to expand when they boil.

If your fudge fails to harden in the fridge, it means that you probably didn't cook it to the right temperature. Fudge is a candy, and that means it is extremely picky about temperature - fudge must be cooked to precisely 237–239 degrees Fahrenheit so that sugar forms the desired consistency when cooled.

The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.

Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

According to most recipes, the ingredients of fudge are cooked to what is termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

The longer you beat once it starts to thicken then the more crumbly the final fudge will be. If you like it smooth - beat it only until comes away from the sides of the pan and sticks well to the spoon.